Shandong Huijian Metal Material Co., Ltd.
Shandong Huijian Metal Material Co., Ltd.
Add to Cart
Galvanized Sheet Metal Zinc DC06 GI Coated Steel Sheet Galvanized Steel Sheet
Hot-dip galvanized steel sheet. The thin steel plate is immersed in the molten zinc tank, so that a thin steel plate with a layer of zinc is adhered to the surface. At present, it is mainly produced by continuous galvanizing process, that is, continuous immersion of rolled steel sheets in a galvanizing tank with molten zinc to make galvanized steel sheets; alloyed galvanized steel sheets. This kind of steel plate is also manufactured by hot dipping, but immediately after it is discharged from the tank, it is heated to about 500°C to form an alloy film of zinc and iron. This kind of galvanized sheet has good paint adhesion and weldability; electro-galvanized steel sheet. The galvanized steel sheet produced by the electroplating method has good workability.
It is suitable for the sealing and anti-rust treatment of galvanized sheets, metal product components and materials. The upper flux immerses the steel components in the mixture of zinc chloride and ammonium chloride to isolate the surface of the components from the air to prevent oxidation and rust. And activate the surface iron molecules, so that the components can more easily achieve the iron-zinc compound reaction in the hot zinc solution; MIG arc brazing can be used to weld low-alloy steel, non-alloy steel and stainless steel, and the main purpose is to weld steel plates with coating on the surface. The heat brought by the droplet transfer causes the galvanized layer to volatilize, and the zinc vapor entering the molten pool is very small, and it continues to be discharged during the solidification process, so there are very few residual pores in the weld. Main applications: construction engineering, machinery manufacturing, container manufacturing, shipbuilding, bridges, etc.
Our Advantages:
1. Honest business with competitive price
2. Professional service on export process
3. Good payment term
4. Good reputation in every market
5. Quality assurance
6. Always a pre-production sample before mass production
7. Always final inspection before mass production
Q:Is galvanized steel expensive?
Galvanized steel is almost the same price as untreated structural steel.
Stainless steel costs four to five times as much as galvanized steel and untreated structural steel.
Niobium alloys are even more expensive.
Q:What is better steel or galvanized steel?
The Difference Between Stainless Steel and Galvanized Steel.
Stainless steel usually has better corrosion-resistant properties than galvanized steel.
Q: Will galvanized sheet metal rust?
Galvanized steel takes a long time to rust, but it will eventually rust. This type is carbon steel that has been galvanized,
or coated, with a thin layer of zinc. The zinc acts as a barrier preventing oxygen and water from reaching the steel,
so that it is corrosion protected.
Q:How do you cut galvanized steel?
Start by clamping the sheet of the galvanized steel securely by using a bench vice with guidelines facing upwards.
Take a circular saw that is fitted with a 7 ¼ inch fiber blade to cut the galvanized sheet, still following the guidelines.
Go over any edges that aren't clean-cut to smooth them down with a steel.
Q:What is galvanised sheet metal used for?
The most common industries are utility, agriculture, construction, bridge and highway, and recreation.
These industries require a variety of sheet metal products,
including “structurals, fasteners, tubing, pipe, wire, nails, reinforcing steel, weldments, complex fabrications, guardrail, and posts.”